|
|
|
 Hall of Fame FIRST Team 254 has arguably helped more teams become good than any other team in FIRST. I don't think they need a lecture on helping their opponents. - Karthik [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
16-12-2008, 15:18
|
|||
|
|||
|
Re: New Power Distribution/ Fuse Pannel Problem
Mole -
The appropriate place for this post is http://forums.usfirst.org/forumdisplay.php?f=1004 , formerly http://forums.usfirst.org/forumdisplay.php?f=745 . Please post / search these forums first - it makes it much easier for us tech support folk to monitor things. There is ~100kOhms between the battery input shank and the output WAGO terminals. When any load is applied, this voltage will vanish. This is an artifact of the (currently defunct) blown breaker indicator circuit. It will not affect normal operation of a robot. I could have sworn I updated section 3.2.5 to indicate this, but it must not have made it in the most recent revision. Thanks for the catch! Long story short, your board is good to go. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New Power Distribution | jsmith234 | Electrical | 6 | 03-02-2007 15:05 |
| Power distribution Block? | Pontchartrain | Electrical | 3 | 27-01-2006 07:30 |
| Power Distribution Requirements | kham | Electrical | 2 | 14-01-2006 12:35 |
| Power Distribution | xxmaddjxx | Electrical | 13 | 30-01-2005 00:43 |
| Stinger Fuse Block and Power Distribution Block | Don Wright | Electrical | 2 | 30-03-2004 10:45 |
Threaded Mode