New Rio Issues, refuses team number and programming

[billbo911]

Originally Posted by professorX

When I open up FRC cRIO Imaging Tool it finds the cRIO but the Mac address and the current IP is not the same shown in the diagram in section 5.1.2.4. When I click the apply button it says some error of the subnet ip address is wrong.

The MAC address (Media Access Control) is the actual physical address hard coded into the networking hardware. Every device that uses TCP/IP has a unique MAC address. According to the manual, there is a label on the bottom of the cRIO that has the MAC for your system. The one in the manual is for reference only and is not what you should be seeing.

Can you give us the exact wording of the error it is displaying?

[Kitmor]

If you have never set the IP address of the controller before, it is automatically set with a team number of 0. So the IP address should default to 10.0.0.2.

Because of this you need to make sure your computer has a static IP address of 10.0.0.6 and a subnet mask of 255.0.0.0. If you don't have your computers IP set correctly it won't be able to re-Image the cRIO.

If you follow the directions on page 5 of the Control System Configuration manual (http://www.usfirst.org/uploadedFiles...ation-0-5c.pdf) for updating cRIO firmware, it should work.

[professorX]

Do I assign the IP address and subnet mask like this?

http://img514.imageshack.us/my.php?image=crionj1.jpg

Also, are you sure the subnet mask is 255.0.0.0? Because in the labview tutorial video FIRST Robotics Competition: Joystick Motor Control in 10 Minutes the guy enters the subnet mask of 255.255.255.0
(link to the tutorial video http://zone.ni.com/devzone/cda/tut/p/id/7977 )

[Joe Ross]

Originally Posted by professorX

Do I assign the IP address and subnet mask like this?

http://img514.imageshack.us/my.php?image=crionj1.jpg

Also, are you sure the subnet mask is 255.0.0.0? Because in the labview tutorial video FIRST Robotics Competition: Joystick Motor Control in 10 Minutes the guy enters the subnet mask of 255.255.255.0
(link to the tutorial video http://zone.ni.com/devzone/cda/tut/p/id/7977 )

The video tutorials show the minimal configuration and do not get into all the details needed for successful operation, especially on the field. You need to follow the manuals for configuration information.

[Kitmor]

Yes that is how you set it, although I would leave the DNS on automatic. Make sure you are setting the IP on the correct network adapter, ie make sure you set it IP for the wired network card on the computer, if the computer has WIFI.

I got the 255.0.0.0 from the manual, and it worked for our team. I can't say that 255.255.255.0 wouldn't work as I have not tried it, but we went by the configuration manual and it worked.

Another thing that I've seen mentioned on the FIRST forums if you are using a computer with more than one network connection, is to disable the all of the network cards except the wired one that is connected to the cRIO. Because during the upgrade process the IP is sometimes set to 0.0.0.0 and this can mess things up if you are connected to other networks at the same time.

[professorX]

Originally Posted by Kitmor

Yes that is how you set it, although I would leave the DNS on automatic. Make sure you are setting the IP on the correct network adapter, ie make sure you set it IP for the wired network card on the computer, if the computer has WIFI.

I got the 255.0.0.0 from the manual, and it worked for our team. I can't say that 255.255.255.0 wouldn't work as I have not tried it, but we went by the configuration manual and it worked.

Another thing that I've seen mentioned on the FIRST forums if you are using a computer with more than one network connection, is to disable the all of the network cards except the wired one that is connected to the cRIO. Because during the upgrade process the IP is sometimes set to 0.0.0.0 and this can mess things up if you are connected to other networks at the same time.

I'm not sure why but I'm not able to set DNS to automatic. If you look at the image again you can see that I can't. I will try what you have suggested and change the subnet mask to 255.0.0.0 instead of 255.255.255.0 and check if that solves problem.
I appreciate your help.

[Kitmor]

I have only set a static IP on a windows XP and under that you can have a static IP and an automatic DNS address at the same time. I just looked at the static IP settings under Vista and it appears that you can't do that any more. I assume that you are using Vista. That said, as far as I know the DNS settings shouldn't matter, and it should work under Vista.

I hope you get this working.

[rsisk]

Another important tip is to disable firewalls on the computer connecting to the cRIO (or DS).

Yet another tip is to try a different computer. We had trouble connecting with the cRIO on Saturday. We did a lot of thing, but one of the last things was to switch to another computer and a lot of problems went away. Could be coincidence, but it is always worth a try.

[darkember]

If you use school computers you might have the proxy still on. You have to turn it off when doing most of the configuration. To do that you go to Internet options-connections-LAN settings.