NI Vision License

[rrossbach]

Originally Posted by keehun

Hello Teams,

I've been trying for the longest time and I could not get the NI Vision licensed. I assume that it is given to us as "licensable" so that we may use it. the serial code on the jacket does not work (the key that starts with L).

How did any of you license it?

Thanks,
keehun

I think there were some other posts related to the Vision Assistant licensing, either here or on the usfirst.org forum.

If you go into the NI License Manager (under Start -> National Instruments) and expand the "Vision" tree, you'll see several vision components listed. Right click on the ones that end with "FRC" in the name and activate them. Don't do anything with the ones that don't have "FRC" in the name. After that you should be able to run Vision Assistant, etc without problem.

Ron
Team 2607 Software Mentor

[Daniel_H]

Originally Posted by rrossbach

I think there were some other posts related to the Vision Assistant licensing, either here or on the usfirst.org forum.

If you go into the NI License Manager (under Start -> National Instruments) and expand the "Vision" tree, you'll see several vision components listed. Right click on the ones that end with "FRC" in the name and activate them. Don't do anything with the ones that don't have "FRC" in the name. After that you should be able to run Vision Assistant, etc without problem.

Ron
Team 2607 Software Mentor

Thanks.

Do what he says, it worked for me.