|
|
|
 Big scoop for everyone here:
All divisions are stacked with talented teams. It's like this is a really big event or something. - PayneTrain [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Big scoop for everyone here:
All divisions are stacked with talented teams. It's like this is a really big event or something. - PayneTrain [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Downloading code- DS says "No Code"
We successfully completed all the benchtop testing, updated the Driver's Station firmware, updated Labview with update 2.0, and reimaged the cRIO.
We are attempting to download just the basic code (no modifications), and are running into some issues. First, we downloaded the code, and we noticed that no "completed" or "deployed" message is shown, so we were unsure if it was finished. The VI's run button went from running (black arrow) to the deployed/run button after about 2 or 3 seconds. The DS displays "Battery: No Code," and the joysticks do nothing. There appears to be no problem with communicating with the cRIO, but nothing seems to happen. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| "Battery: No Code" after uploading .out file to cRIO | knine143 | FRC Control System | 1 | 20-12-2008 22:14 |
| Screenshot of "code not understood" or similar error needed! | Elgin Clock | Programming | 3 | 17-02-2006 22:06 |
| Modified default code gives "code violation" | scottmso | Programming | 8 | 10-02-2006 23:17 |
| Code Errors With "Bells and Whistles" | Ryan O | Programming | 2 | 31-01-2006 19:29 |
| Code error on RC after downloading "bells and whistles" version of Kevins camera code | DanDon | Programming | 6 | 10-01-2006 18:07 |
Threaded Mode