|
|
|
 Our "gracious professionalism" credo insists that we make decisions that are based solely on the desire to inspire and recognize science and technology using robot construction and competition as a vehicle. - Al Skierkiewicz [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
cRIO configuration issue- serial connection to laptop
We're trying to set up the serial connection for the cRIO. We can get a terminal window open inside wind river and it tells us that it's connected, but when we turn on/ reset the cRIO, it doesn't give us the little message indicating a successful boot that 5.4.1.3 says we should get. We've set up the terminal window exactly as described in section 5.4.1 of the control system manual. We've got the console-out dipswitch in the on position. We've also made sure the null modem cable we're using is good. Does anyone know what's wrong?
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| cRIO/Driver Station output to laptop | smcmahon | FRC Control System | 3 | 14-12-2008 13:51 |
| Tricks getting the CRIO to talk to laptop | mac7attack | FRC Control System | 10 | 08-12-2008 09:20 |
| The poor serial port less laptop owners with a ExpressCard Slot | Kingofl337 | Programming | 8 | 11-03-2008 22:25 |
| Dell laptop serial port | notquitehere188 | Programming | 18 | 26-10-2006 22:32 |
| Code Download via Serial Issue | phrontist | Programming | 9 | 08-02-2005 17:32 |
Threaded Mode