|
Re: The Bumper Rules
Quote:
Originally Posted by Cyberphil
Hey everyone. I just wanted to make things clear for our team, and other teams. What are the official size constraints for the bumpers on the robots? I have heard some people say that 2/3 of the outside of the robot has to be covered. But then I have heard that you need at least 6" on each side too. I don't know if both of these rules are true,or if one is, but can you please help me out?
And good luck to all teams for 2009, and hopefully many years to come!
Phil
|
<R08> is your friend. 6" per segment minimum; 2/3 of the bumper perimeter (see Section 8.2) must be covered.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons
"Rockets are tricky..."--Elon Musk
 
|
If this information is not 100% correct, you should follow the default advice I have for when anything goes wrong: Blame the Programmers - IKE [more] 
05-01-2009, 21:46
Similar Threads
Threaded Mode