|
|
|
 A winning robot is not a winning robot unless you have winning drivers too. You need the time to develop both. - Jim Zondag [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| A winning robot is not a winning robot unless you have winning drivers too. You need the time to develop both. - Jim Zondag [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Axis Camera responding in the Vision Assistant but not in WindRiver
Hey all-
The camera is responding perfectly when connected to the computer by crossover in the Vision Assistant, but when it's plugged into port 2 on the CRIO with the crossover and running the SimpleTracker code with HSL thresholds widened enough to catch an image, the code fails to find any particle. I've already run the Axis Camera Setup Utility, and both FRC/FRC and root/admin users exist. The camera is setup with IP 192.168.0.90. I don't know what I'm missing, but I'm sure that I'm missing something as teams HAVE been able to track particles with the WindRiver SimpleTracker example. Any help would be greatly appreciated- Dandon 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems with the Axis Camera | popo308 | FRC Control System | 16 | 01-15-2009 07:38 PM |
| Focusing the AXIS camera in LV | Bryan Herbst | Programming | 3 | 01-03-2009 11:21 PM |
| Camera will track one light, but not two? | Kevin Watson | Programming | 2 | 02-01-2007 10:34 PM |
| Camera did not work for well at the regionals, but worked great at home. | Alan Ing | Programming | 12 | 04-17-2006 05:43 PM |
| Camera Not Responding To Code | itzrobz | Programming | 2 | 02-05-2006 12:47 PM |
Threaded Mode