|
Re: Trailer Hitch Drawing GE-09040
Quote:
Originally Posted by falconmaster
according to 09040 drawing, it looks like the trailer and the robot will be fixed together so that the trailer will not be movable independently, is that right or I am looking at the wrong drawing?
|
What you see in the drawing is the hitch that mounts to the robot. The trailers tongue will attach in the middle of the C-channel slot via a 1/4" pin that drops in from the top. The pinned tongue will not be able to move laterally or vertically, but can pivot around the pin in a horizontal plane centered on the pin.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|
Finally I wish everyone here on ChiefDelphi good luck and more importantly a fun build season. - mechanicalbrain [more] 
06-01-2009, 16:41
Similar Threads
Hybrid Mode
