Need help finding plastic supplier

[AdamHeard]

We've been searching all over trying to find a supplier that sells all of these at full lengths, not just per a cut piece or by the foot (or just 2 of the 3). If we can get them all from the same supplier, we'll save a lot of money.

1) a full 4'x8' of black 1/16" G-10/FR4 Garolite

2) several full 4'x8' of polycarbonate in various thicknesses, probably something in the .02-.03" up to .1" ballpark.

3) 2-3" Black ABS Rod.

The plastic sheets are for robot design, the ABS rod is for something a sponsor would like us to do and since we probably need 40-60 feet of it, we'd like to do all this in one big order for savings.

We've found a lot of potential suppliers that don't list inventory online and will be calling them, just hoping one of you knows someone sooner than that.

Also, if you don't actually *know* a supplier that probably has all this, please don't just throw something out there; we're already past onlinemetals, mcmaster, grainger, etc....

Thanks All.

[Andrew Rudolph]

I was looking @ usplastics.com they only have the garolite in 4' x 4' sheets, but professionalplastics.com seems to have it listed but the site isnt loading the dimensions, but have the abs and polycarb.

[dani190]

i know people they are good friends of mine.. but we are in toronto.

They might ship out if u really need it

http://www.jjdownsplastics.com/