|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#19
|
|||||
|
|||||
|
Re: Hey anybody have the kit in SolidWorks cad
Suj, the one time you open the step file it WILL lag a bit of your computer is not "up to speed".
The one time lag is ok, but just let it process the step file completely & correctly, & finish opening. After it is opened, you will notice that is is now in your working directory as a .sldasm file with seperate .sldprt files for each of the components. The next time you open that .sldasm file, if it does not open as quick as you would like, there is a way to get around that which I use. I know this sounds strange, but ANY SolidWorks assembly can be saved as a part file & will open a lot faster the next time since it is now a single file, & not many files spread out over your working directory. I advise this technique ONLY if you don't need to move any parts on the "assembly" or modify any parts later. (This will obviously require a bit of insight on your part). (For example, I just performed this technique on the C-Chassis assembly file because in my application, it is a static item, which I will not need to move or modify any individual parts on. On the other hand, the Toughboxes, I may want to be able to move around the gears in the future, so keeping it as an assembly was ideal for my application. Your results may vary, but this has worked for me in the past to keep the files sizes & number of files to a minimum. Btw, when you click to save an assembly as a part file, select the "All components" in the radio button options within the "save as" dialog box for best resuts or experiment to see what works best for you. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Does anybody have any pictures of team2264 | vivek16 | General Forum | 0 | 03-11-2007 21:02 |
| Anybody have extra solenoid wires? | HypnoticSheep | General Forum | 3 | 22-05-2007 20:09 |
| anybody have a schematic for air tanks? (was: i have a question) | Pankowgears | Pneumatics | 8 | 07-02-2007 17:56 |
| Anybody have a code for an autonomous mode to go to the 50 point bar???? and... | chaoticprout | Programming | 9 | 06-11-2004 12:22 |
| Does anybody have a cad drawing or a black and white picture of this years field? | Alex Cormier | General Forum | 3 | 28-05-2004 11:46 |