|
|
|
 I haven't been negative about any FIRST game yet, but scaling and cleaning fish in 2009 that were used in 2008 is going to stink. Literally. :P
- Billfred [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I haven't been negative about any FIRST game yet, but scaling and cleaning fish in 2009 that were used in 2008 is going to stink. Literally. :P
- Billfred [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
11-01-2009, 11:19
|
|||
|
|||
|
Re: Axis Camera responding in the Vision Assistant but not in WindRiver
When we connect the camera directly to the computer with a crossover cable (and set the computer's IP to 192.168.0.6), we can open up the NI Vision Assistant, set the Axis' IP as 192.168.0.90, and acquire photos.
When we connect the camera to port 2 on the cRIO (and change the computer's IP back to 10.xx.yy.6 and connect all the cables properly), we can "see" the camera image by running LabVIEW, but we can't connect using the NI Vision Assistant no matter what IP we try for the Axis. I guess this just means that, to use the Vision Assistant, you have to connect the camera directly? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems with the Axis Camera | popo308 | FRC Control System | 16 | 15-01-2009 19:38 |
| Focusing the AXIS camera in LV | Bryan Herbst | Programming | 3 | 03-01-2009 23:21 |
| Camera will track one light, but not two? | Kevin Watson | Programming | 2 | 01-02-2007 22:34 |
| Camera did not work for well at the regionals, but worked great at home. | Alan Ing | Programming | 12 | 17-04-2006 17:43 |
| Camera Not Responding To Code | itzrobz | Programming | 2 | 05-02-2006 12:47 |
Threaded Mode