Problems "Seeing" the Wireless Bridge

Chipawa · #1 11-01-2009, 13:03

So our laptop can communicate with the wireless router - both directly and when conected to the Drivers Station - but we can't see the wireless bridge. We've set the IP address to 10.11.11.1 (Team 1111), but it's not showing up on our local network.

Any suggestions would be appreciated.

-Chip Tucker

Mark McLeod · #2 11-01-2009, 13:09

Check the security settings of both the bridge and the router.
It's easiest to turn them both off.

usbcd36 · #3 11-01-2009, 13:15

The bridge gave us a lot of trouble. It's best to reset to default settings, then connect a computer to it and use that computer to configure it to work with the router.

Also, be sure you've set the router to start DHCP addresses at 10.11.11.10.

JeffChan · #4 11-01-2009, 15:00

Quote:

Originally Posted by Mark McLeod

Check the security settings of both the bridge and the router.
It's easiest to turn them both off.

We ran into the same issue and that solved it.

Chipawa · #5 11-01-2009, 18:58

Thanks all. We read back over the documentation, followed the instructions step-by-step and now have it working. Sometimes you just have to read the directions.

Now we can move forward and encounter new problems!

-Chip Tucker

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Championship Event - Where the "Random" Match Sorting Really "Shines"	Travis Hoffman	Championship Event	57	19-04-2007 08:06
"Thunderbirds" Vs. "Team America" Which one will rule the box office?	Elgin Clock	Chit-Chat	3	07-09-2004 19:53
Problems with "The Meeting Place"	Bob Steele	General Forum	2	19-02-2003 01:04
Seeing over the "wall"	sanddrag	Rules/Strategy	5	05-01-2003 12:54
how tall is the ramp when in "up" and "balanced" position???	archiver	2001	1	24-06-2002 00:54