what does all these updates??

[mahmosh]

i want to download all the updates that i need for the windriver:
i entered this link : http://first.wpi.edu/FRC/frcupdates.html
i have alot of updates i read everything but there is alot so i couldn't understand how to install it (i don't know where are my feet) !!!
i see:
1) WorkbenchUpdateV1.2.1562.exe
2) Source code for build 1562. and what are SourceForge server
3) FRCLabVIEWUpdate1.0
4) Beta update 5
5) Source code for beta release
6) FRCNIWRUpdate1.0 (88mb) - do not use this updater for V1.2 or newer of the C/C++ libraries

so what the deffernce between all !!!

[mahmosh]

if someone could help me how to download all the updates that i need step by step .. please help ...
thanks

[mahmosh]

please help me i am waiting

[Molten]

Please be patient. I personally can't help you in this regard. I'm not knowledgeable at this sort of thing. However, the best responses come with patience. It might be a couple of days before you get a good answer or it could be 10 minutes. Either way, adding extra posts isn't going to get a response any quicker.

[d235j]

First, install the software from the two DVDs included with the kit (do not change the default directories).
After that, you need to install the FRCLabVIEWUpdate2.0 (clicking on 1.0 will take you to 2.0) [fully unzip it, then install it]; and then run WorkbenchUpdateV1.2.1562.exe.
Just ignore the others (except for the source code for WPILib, you might want to look at that).

After updating, you'll need to re-image the cRIO with the correct software (and don't forget to update the driver station; see http://usfirst.org/community/frc/content.aspx?id=10934).

[mahmosh]

thanks for ur help ... i had installed the program and the updates without the manual... i don't know if i made something wrong ... so should i unistall the program and install it again ?
and u said (except for the source code for WPILib, you might want to look at that). what to look for ??? i didn't understand

and i want to tell you that i updated the driverstation.. should i update it again ??!!!

[Shinigami2057]

Hi mahmosh,

The WPILib source code may be useful to you if you want to see how the libraries work; you don't need to install them.

The driver station update from November is (as far as I know) is the most recent one; you shouldn't need to update it again right now.

[mahmosh]

thaaaaaaaaaaaaaaaaaaaaaaaanks alot
you helped me .. i downloaded all the updates and it does work well and everything is ok ...