12.75:1 enough? - Chief Delphi

Welcome to a Chief Delphi poll, where the responses are made up and the numbers don't matter. - JohnSchneider [more]

		Chief Delphi > Technical > Motors
12.75:1 enough?

Thread Tools

Rate Thread

Display Modes

12-01-2009, 11:23

DMetalKong DMetalKong is offline

Registered User

AKA: David K.

no team

Team Role: College Student

Join Date: Jan 2008

Rookie Year: 2006

Location: Bridgewater

Posts: 144

12.75:1 enough?

Okay, I was working with some numbers and this is what I came up with for a 2 CIM drive (1 driving each side of the robot).

Torque supplied by 1 CIM at peak efficiency = 0.48 N m = 4.25 lbf in.
Torque supplied by 2 CIMs = 4.25 * 2 = 8.5 lbf in.

Max. Frictional Force = [150 lbf (robot) + 40 lbf (trailer)] * 0.2 (rounding the COF up quite a bit) = 38 lbf.

Max. Torque = 38 lbf * 3 in (wheel radius) = 114 lbf in.

Torque needed/Torque provided = 114/8.5 = 13.4.

A toughbox provides a 12.75:1 reduction. Does anyone think that this will be sufficient for powering a robot?

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is 12 hours enough?	Heretic121	Technical Discussion	15	29-03-2006 09:28
pic: Close enough?	S.Nickens	Robot Showcase	11	12-02-2005 00:34
Is PBasic enough or not	punarhero	Programming	2	05-03-2004 07:59
Enough with the bumpers!	archiver	2000	2	23-06-2002 22:32
Enough already...	Gui Cavalcanti	Rules/Strategy	3	08-04-2002 09:35

All times are GMT -5. The time now is 22:17.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.