cRio losing connection when "run as startup"

[mgurgol]

I am trying to create a Stand-Alone application and the cRio is losing communications.

I am able to run Robot main within Labview to test the code and confirm that the robot is responding correctly. I then build the applicaton. After building, it I run deploy or "Run as Startup" from the drop-down menu I recieve the Lost Communicatons with the cRio dialog and the applications stops deploying.

I had previously been able to deploy an application as startup.

Is there something I need to check to make sure the communications are correct for the build. The laptop's IP is 10.10.94.6 (team 1094). What changes would need to be done to connect the PC directly to the cRio so that the wireless communications are taken out the equation.

Any help would be appreciated

[Luke Pike]

How long did you let it go? When I deploy a stand-alone application, I get that lost communication message, but it goes away after a while and continues. Maybe it's doing a live reboot or something?

[mgurgol]

I will try and wait longer and see what happens. I know I waited about 30 sec0nds the one time.