Problem uploading code from a VM

LinuxMercedes · #1 01-12-2009, 06:23 PM

Hmmm....I'm 99% sure those settings are correct. Especially because I can undeploy code from my box. I'll give it a look tonight when I've got access to the cRio.

EHaskins · #2 01-12-2009, 07:55 PM

Quote:

Originally Posted by LinuxMercedes

Hmmm....I'm 99% sure those settings are correct. Especially because I can undeploy code from my box. I'll give it a look tonight when I've got access to the cRio.

If is still doesn't work, I'd say you need to check you firewalls, on both the physical and virtual machines, but I assume you already did this.

Otherwise I'm out of ideas.

360skier · #3 01-12-2009, 08:28 PM

Are you reseting the cRIO after deploying?

LinuxMercedes · #4 01-12-2009, 11:31 PM

Ok...

I have allowed everything that Windows firewall popped up a message about. I'll go ahead and turn my firewall off entirely, though.

I am resetting the cRio every time I try to download something. The strange thing is that I can download code to debug it from the RAM, just not deploy...

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Battery: No Code" after uploading .out file to cRIO	knine143	FRC Control System	1	12-20-2008 10:14 PM
Uploading Old Code	G1279	Programming	1	01-12-2008 10:35 PM
Problem with program uploading	1573	Programming	49	01-28-2007 01:51 PM
HELP needed, problem with streamling, need uploading space or diffrent solution...	Nimmy	General Forum	5	02-15-2006 11:18 AM
Code problem	iBob	Website Design/Showcase	3	01-17-2004 02:14 PM