|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
||||
|
||||
|
Re: Source for Fisher Price Motors
Ask your supplier whether the motors have the number 00968-9015. That's Fisher-Price's internal part number, and if it's printed on the flux yoke, it's the appropriate motor.
Otherwise, you could be getting one of many similar but not identical motors. In a FIRST application, they can vary hugely in performance. The current F-Ps are among the weakest; the old Mabuchis were slightly less powerful, and some of the newer Mabuchis could output over 400 W (they were 6 V motors running at 12 V). Basically, as far as RS-550 motors are concerned this year, the 00968-9015 part number is the most effective way to demonstrate to an inspector that they're legal. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Source for Fisher Price gearbox and motor | Joe Ross | Motors | 9 | 15-02-2007 01:01 |
| Current Draw for Fisher Price Motors? | KMAC42 | Motors | 2 | 25-01-2007 12:05 |
| Trading for Fisher Price Motors | Joe Johnson | Kit & Additional Hardware | 0 | 25-03-2003 14:57 |
| Fisher Price Motors for Drill Motors | archiver | 2001 | 0 | 24-06-2002 00:22 |
| Fisher Price Motors for Drill Motors | archiver | 2001 | 0 | 24-06-2002 00:22 |