Using the analog sensor .vi's

[Hazmatt]

Originally Posted by Greg McKaskle

The first part of that, using 1 instead of the enum "AI 1" will result in a coercion dot, and will work as long as you know the encoding. This is sometimes useful when casting between enums or when using a loop to get all values. So in other words, this isn't really an error, but when doing constants, it is much more readable to use the specific ones.

Greg McKaskle

Hm, i'm really interested to know where I could have read about this beforehand.

[BLAQmx]

When make controls and constants for in LabVIEW (especially for WPILib) it will help you greatly if you right-click on the input terminal and select Create » Constant/Control. This will ensure the constants and controls are the correct data type(s) etc.

[Greg McKaskle]

Anytime you are given a subVI that you intend to use, I recommend looking at the front panel. You will usually get a better sense of what the author intended to have wired in. You can then copy/paste, or from the icon create control or constant. The create... is a short cut to opening and copy/paste.

Greg McKaskle

[PhilBot]

Originally Posted by BLAQmx

When make controls and constants for in LabVIEW (especially for WPILib) it will help you greatly if you right-click on the input terminal and select Create » Constant/Control. This will ensure the constants and controls are the correct data type(s) etc.

I call that action the "easy button" with my team.

I can't beleive there isn't a hotkey for "create constant"