|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: Conveyor Belt
Anybody know how to go about shortening and reataching a treadmill belt??
Thanks Bruce |
|
#17
|
|||
|
|||
|
Re: Conveyor Belt
Ah, the designs my former team has produced for a screw type lift only accommodate one ball. What are you planning on driving it with?
|
|
#18
|
||||
|
||||
|
Re: Conveyor Belt
anyone have any pictures of a ball lift mechanism?
|
|
#19
|
|||
|
|||
|
Re: Conveyor Belt
I know that in 2006, my team used a conveyor belt to bring the balls up to a launcher. We used a conveyor belt at the top and guide rails at the bottom. I heard that it worked very well.
|
|
#20
|
||||
|
||||
|
Re: Conveyor Belt
Im confused on how you would do this
|
|
#21
|
|||||
|
|||||
|
Re: Conveyor Belt
Quote:
Our web page has some pictures of the prototype. Last edited by MrForbes : 13-01-2009 at 10:46. |
|
#22
|
||||
|
||||
|
Re: Conveyor Belt
Any suggestions on fattening up the center of a PVC pipe to drive a belt?
We intend to use 2 1/2 ID PVC with guides on the way up, aprox 30" long total. The alignment issue is controlled by two eyebolts at the top and a very rigid frame. |
|
#23
|
|||||
|
|||||
|
Re: Conveyor Belt
Maybe you could thin down the edges instead? run the motor that drives the pipe, and hold a file on it. Should only take a day or two to get the profile you want
![]() Or if you can find thin sheet PVC material you could glue on strips of it. |
|
#24
|
|||
|
|||
|
Re: Conveyor Belt
There are certain materials that we have discovered to grip orbitballs extremely well..... (a little hint: bedroom would be incomplete without a dresser that can hold clothes in place....) My advice if you cant figure this out, is to bring an orbitball on a date to a hardware store an run it through any materials.
|
|
#25
|
|||
|
|||
|
Re: Conveyor Belt
Im looking for some urethane belting material and am trying to find a cost effective way of bonding the stuff. Anyone have any ideas?
|
|
#26
|
||||
|
||||
|
Re: Conveyor Belt
Does it need to be urethane, or would something like neoprene work? You might experiment with some Pliobond contact cement.
http://www.mcmaster.com/#conveyor-belts/=fxqrh |
|
#27
|
|||||
|
|||||
|
Re: Conveyor Belt
Quote:
http://www.chiefdelphi.com/forums/sh...light=polycord |
|
#28
|
||||
|
||||
|
Re: Conveyor Belt
It's kinda funny how things work out.
In the last 3 weeks we've tried everything we read on these forums, and it was always one thing or another that went wrong. Finally, last night we came up with our own solution to this that hasn't been suggested on these forums. What we found left some black residue behind, so once we test 2 more materials that are coming in Thursday I'll post what we've done. I knew once I found this stuff when spelunking through TrueValue in Week 2 that we should have used it right away, but alas I'm not the only one on the team. My tip: stay away from Lowe's and Home Depot when in a search of local hardware stores; they're too big and you'll spend way too much time looking for the right thing. Start with the mom and pop shops that are small and have everything closer together without all of the non-relevant items in between them. On top of that, usually you can touch/sample a material without opening an entire box. Then, once you have an idea of what you want, purchase the sample and test on the prototype. |
|
#29
|
||||
|
||||
|
Re: Conveyor Belt
Quote:
Your answer is most appreciated!! |
|
#30
|
||||
|
||||
|
Re: Conveyor Belt
We have used a conveyor belt material manufactured by Intralox. It comes in multiple widths and uses a variety of sprocket diameters.
http://www.intralox.com/ |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Conveyor Belt | Setsanto | 3D Animation and Competition | 2 | 21-01-2008 20:51 |
| conveyor belt materials? | Salik Syed | Technical Discussion | 7 | 13-02-2006 14:51 |
| Conveyor Belt | Garth1388 | Inventor | 4 | 30-01-2006 13:33 |
| COnveyor belt wheels | sdcantrell56 | Technical Discussion | 4 | 18-01-2006 00:10 |
| vertical conveyor belt | ahecht | Technical Discussion | 3 | 15-02-2002 16:16 |