Quote:
Originally Posted by tomy
i will try to charge the battery because it said that that the voltage was like 0.01 i think.
|
It sounds like either the Analog Breakout on the first NI module is not connected to the Power Distribution, or the jumper on the Analog Breakout is not set correctly to provide battery voltage monitoring.
Quote:
|
if that dosent iwork i do not know what we will do
|
What you
should do is follow the very specific and detailed directions in Chapter 2 of the Control System Manual provided here:
http://www.usfirst.org/frccontrolsystem
It refers to the other chapters, so you will need them all in order to do it properly.