|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||
|
|||
|
Re: [Windriver] Getting error on run: Download Failed
I don't know what you mean by ping the cRIO (with cmd prmt?).
I do connect and disconnect just fine. Everything is set up including the advance options string. (Although it didn't appear in the manual). Am I reading an old manual? Still no luck though. ping cmd: Code:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\James>ping 10.17.99.2
Pinging 10.17.99.2 with 32 bytes of data:
Reply from 10.17.99.2: bytes=32 time<1ms TTL=64
Reply from 10.17.99.2: bytes=32 time<1ms TTL=64
Reply from 10.17.99.2: bytes=32 time<1ms TTL=64
Reply from 10.17.99.2: bytes=32 time<1ms TTL=64
Ping statistics for 10.17.99.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Last edited by JHale : 14-01-2009 at 21:58. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Getting Familiar with Programming in WindRiver | kyungjin | C/C++ | 35 | 17-01-2009 13:04 |
| Getting Live Feed from Axis Camera in Windriver | Inoperational | C/C++ | 8 | 15-01-2009 01:21 |
| Getting Started in Windriver C/C++ | 7-11number1 | C/C++ | 3 | 10-01-2009 21:46 |
| Strange WindRiver Error | Maxpower57 | Programming | 1 | 10-12-2008 21:41 |
| Basic Run Error | BBFIRSTCHICK | Programming | 10 | 02-04-2003 22:43 |