Camera probs/coding in LabView

Greg McKaskle · #1 15-01-2009, 22:57

Unless you have logged into the camera and changed the IP, it should be 192.168.0.90, the factory default I believe. The camera setup utility doesn't change the IP either.

Try that IP, or whatever the documentation says is the factory default.

Greg McKaskle

DSST\neal.ian · #2 25-01-2009, 17:01

We got it. We were running the wrong VI <

> Who, me? Would I do that? </

> The only question we have now and what we are currently working on is how the heck to link the color tracking with the motor controls, but I'm sure we will work that out. Thanks, though.

Luke Pike · #3 25-01-2009, 17:25

Quote:

Originally Posted by DSST\neal.ian

The only question we have now and what we are currently working on is how the heck to link the color tracking with the motor controls, but I'm sure we will work that out. Thanks, though.

If you want to face the target with your robot, turn towards the error. If you want to face the target with a turret, use an encoder.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Axis Camera Programming in Labview	Striker_27	NI LabVIEW	10	09-01-2009 19:19
Labview cant find the camera	kevin.fort	LabView and Data Acquisition	5	19-01-2007 12:18
Labview Demo File for 2006 Camera?	JABianchi	General Forum	2	15-09-2006 18:23
how do i find the camera with labview?	CompMaster	NI LabVIEW	0	16-02-2006 12:52
Camera and Labview	phrontist	LabView and Data Acquisition	1	28-01-2006 21:07