16-01-2009, 10:22
|
 |
Mad Scientist
AKA: Me
 FRC #2040 (DERT) Team Role: Engineer
|
|
Join Date: Apr 2005
Rookie Year: 2003
Location: Peoria, IL
Posts: 1,968
|
|
|
Re: 4WD vs. Chain Drive
Quote:
Originally Posted by JesseK
Hmm, interesting points above made me think of something.... Arguably, you could take 1 FP + 1 Banebots 545 through their own AM Planetaries into a toughbox and have that drive one side, with an identical setup on the other side. Estimations for worst-case here are that each motor pulls 5 amps when you're pushing. This is only doable because of the coefficient of friction though. So long as the chains drive all wheels that touch the ground, it would work ok. I'd argue that acceleration with this setup is very close to that of 1 CIM per side.
It's downside is that it adds much more complexity than needed and is somewhat expensive for what you get.
|
Also remember that the CoF on the carpet edges is different then the Regolith
__________________
___________________
"We are not now that strength which in old days moved earth and heaven; that which we are, we are;
One equal temper of heroic hearts, Made weak by time and fate, but strong in will
To strive, to seek, to find, and not to yield. "- Tennyson, Ulysses
|
The big lesson we learned ... our past does not limit our future, that superior attitude will beat out big budgets. - [more] 
Similar Threads
Threaded Mode