cRIO v7 fails

MikeDubreuil · #1 18-01-2009, 12:53

You will also need to restart the cRIO (by removing power, waiting a couple seconds, and re-applying power) to make everything work.

Peter H · #2 18-01-2009, 13:02

I updated LabView to the latest configuration. I was unable to update the Driver station; same problem with the USB drive as several other teams reported. I will try other USB drives Tuesday to see if one works.

We recycled cRIO power several times, waiting up to several minutes between.

Manoel · #3 18-01-2009, 13:57

Quote:

Originally Posted by Peter H

I updated LabView to the latest configuration. I was unable to update the Driver station; same problem with the USB drive as several other teams reported. I will try other USB drives Tuesday to see if one works.

We recycled cRIO power several times, waiting up to several minutes between.

Since you didn't update the DS, don't bother with the cRIO. It just won't work without the DS update. For us, an old Kingston DataTraveler did the trick, don't forget to reboot the DS after plugging the flash drive and everything should work as intended.

Greg Marra · #4 18-01-2009, 14:03

Quote:

Originally Posted by Manoel

For us, an old Kingston DataTraveler did the trick,

It is times like these I wish FIRST had an official wiki where people could aggregate knowledge about what works and what doesn't work. Someday...

MikeDubreuil · #5 18-01-2009, 14:26

Quote:

Originally Posted by Manoel

Kingston DataTraveler did the trick

Me too! I used a 16GB Kingston DataTraveler. Worked great.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cRIO fuse??? 20 or 30?	mynameisbob	Electrical	12	09-01-2009 11:33
Code runs only once, fails on reset	roknjohn	Programming	7	21-02-2005 20:24
Code suddenly fails to initialize	miketwalker	Programming	11	19-02-2005 15:23
Camera fails to output anything on serial lines	steven114	Electrical	10	18-01-2005 16:12
When all else fails....	ColleenShaver	Robot Showcase	5	02-02-2003 01:11