Wireless and wired simultaneously?

[pheadxdll]

I've got that setup running on XP right now. Only difference with yours is that I'm connected wirelessly to the DS router and I have an ethernet connection for the internet. It's awesome, I can debug the robot wirelessly while posting on Chief delphi.

Make sure what ever device that connects to the robot is statically set to 10.xx.yy.6. I have the subnet set at 255.0.0.0 and I left the default gateway blank. My ethernet device is set to obtain an ip address automatically.

Everything seems to work okay. Firefox knows to use the connection with access to the internet and the FRC cRio imaging tool + wind river + labview have no problems finding and connecting to the robot.

[leftylink]

Thanks for the support. The problem was that I had set the Default Gateway, thinking it was necessary. I have removed it, and hopefully it will work on Monday.

[Booksy]

Do you not have DHCP on this wireless network? or am I missing something...

[omalleyj]

I was using this setup also on XP and I found that I *had* to set the default gateway explicitly. When I used the wired connection to 10.*.*.6 XP was creating a default gateway on that domain and I lost connection to the internet on my wireless. I added explicit default gateways for both the 10.* (the laptop itself) and 192.168.* (the wireless router) and life was good again.

If you have problems you can use either 'netstat -r' or 'route print' to see what your default gateway was before and explicitly add it to your wireless TCP/IP settings.

HTH
Jim