Pressure regulator

Mr. Freeman · #1 19-01-2009, 21:03

I've had this idea for awhile. Is there any rule that might prohibit attaching a servo to the dial on one of the kit regulators? No modification to the regulator is necessary if done properly.
Program the servo to turn to different positions based on buttons on the OI. Because the regulators vent excess pressure, excess pressure would be vented if the dial is turned to a lower setting while the system is charged.

CHIP SWARF · #2 19-01-2009, 21:29

Look at the SMC ITV series:
http://www.smcusa.com/sections/products/airline.asp

or put "electronic pressure regulator" into GOOGLE for more options.

dlavery · #3 19-01-2009, 22:26

Quote:

Originally Posted by Mr. Freeman

I've had this idea for awhile. Is there any rule that might prohibit attaching a servo to the dial on one of the kit regulators? No modification to the regulator is necessary if done properly.
Program the servo to turn to different positions based on buttons on the OI. Because the regulators vent excess pressure, excess pressure would be vented if the dial is turned to a lower setting while the system is charged.

You may want to look at this Q&A Forum answer.

-dave

.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the Norgren Pressure Regulator show working pressure or stored pressure?	Madison	Pneumatics	7	14-02-2008 17:40
Nason Pressure Regulator	Calvin_1631	Pneumatics	9	09-02-2006 00:40
Nason pressure regulator...HELP!!!	Bob Steele	General Forum	0	25-02-2004 16:08
pressure regulator	blindguyinanorg	Pneumatics	12	20-02-2004 08:54
Translating pressure sensor readout into actual pressure	Mercutio	Pneumatics	0	13-02-2004 16:29