|
|
|
 At every event I've seen this year, there has been at least one robot that left a part on the field. Even some of the robots have decided they don't want to play and this year and made a break for it in autonomous! :yikes: - ctt956 [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
19-01-2009, 21:03
|
|||
|
|||
|
Re: Pressure regulator
I've had this idea for awhile. Is there any rule that might prohibit attaching a servo to the dial on one of the kit regulators? No modification to the regulator is necessary if done properly.
Program the servo to turn to different positions based on buttons on the OI. Because the regulators vent excess pressure, excess pressure would be vented if the dial is turned to a lower setting while the system is charged. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Does the Norgren Pressure Regulator show working pressure or stored pressure? | Madison | Pneumatics | 7 | 14-02-2008 17:40 |
| Nason Pressure Regulator | Calvin_1631 | Pneumatics | 9 | 09-02-2006 00:40 |
| Nason pressure regulator...HELP!!! | Bob Steele | General Forum | 0 | 25-02-2004 16:08 |
| pressure regulator | blindguyinanorg | Pneumatics | 12 | 20-02-2004 08:54 |
| Translating pressure sensor readout into actual pressure | Mercutio | Pneumatics | 0 | 13-02-2004 16:29 |
Threaded Mode