Go to Post Hey people, I found out the answer to my question and that one guy eric is right all you have to do is read the manual. The rules are in chapter 7.3.5.1, sections - .:) - ronald [more]
Home
Go Back   Chief Delphi > ChiefDelphi.com Website > Extra Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
Thread Tools Rate Thread Display Modes
  #31   Spotlight this post!  
Unread 19-01-2009, 22:23
Unsung FIRST Hero
Karthik Karthik is offline
VEX Robotics GDC Chairman
no team
Team Role: Mentor
 
Join Date: Apr 2002
Rookie Year: 1998
Location: Toronto, Ontario, Canada
Posts: 2,346
Karthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond reputeKarthik has a reputation beyond repute
Re: pic: Ball Harvester

Quote:
Originally Posted by EricH View Post
And as for legality, 3/4 sides of the robot are legal. The remaining side needs work.
Well, according to Team 842 (see below), they believe all four sides are legal and don't need any remaining work. (Despite a fairly specific and clear Q&A entry.) I'm very interested in how this will play out. I'm sure many teams would like the extra space on their robot for their intake that 842 is planning to gain with their diagonal bumpers.

Quote:
Originally Posted by falconmaster View Post
Well we feel that we will be allowed with our bumper design. W willadd bumpers to the diagonal sections with 6 inch sections. If we are not allowed we will swap them out with a straight six inch sections. Our argument though will be that the corners will be protected, no bumper section will be less than 6 inches and the weight of the part not on the bumper perimeter will be counted against the robot weight. Even if you had a straight section instead of diagonals the corners would not be protected on the inside. Oh well we will see
__________________
:: Karthik Kanagasabapathy ::
"Enthusiasm is one of the most powerful engines of success. When you do a thing, do it with all your might. Put your whole soul into it. Stamp it with your own personality. Be active, be energetic, be enthusiastic and faithful and you will accomplish your object. Nothing great was ever achieved without enthusiasm" -- R.W. Emerson
My TEDx Talk - The Subtle Secrets of Success
Full disclosure: I work for IFI and VEX Robotics, and am the Chairman of the VEX Robotics and VEX IQ Game Design Committees
.
Reply With Quote
  #32   Spotlight this post!  
Unread 19-01-2009, 23:05
falconmaster's Avatar
falconmaster falconmaster is offline
Registered User
AKA: Ledge
FRC #0842 (Falcon Robotics)
Team Role: Teacher
 
Join Date: Jan 2004
Rookie Year: 2001
Location: Phoenix, Arizona
Posts: 1,406
falconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond repute
Send a message via MSN to falconmaster
Re: pic: Ball Harvester

Quote:
Originally Posted by keen101 View Post
Well, were supposed to use a string to figure out our bumper perimeter. So, one interpretation would be that the angled bumpers would not be in the bumper perimeter, therefore you could still have them, but you'd have to consider them part of the robot and weigh them with the robot. But, that won't work either, because it clearly states that the trailer can only make contact with the bumpers, and if it made contact with the inside "bumpers", then that would technically be making contact with the robot. Even though it'd be a soft part of the robot.

So, i am concluding that it is illegal, and very risky to do it since we might have to change it later.
Do the rules say the trailer contact part in rules that mention the trailer?
__________________
Faridodin "Fredi" Lajvardi KD7WKD
Reply With Quote
  #33   Spotlight this post!  
Unread 19-01-2009, 23:14
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,819
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: pic: Ball Harvester

Quote:
Originally Posted by falconmaster View Post
Do the rules say the trailer contact part in rules that mention the trailer?
No, they don't. The trailer is, at least for the purposes of <G32>, also known as the robot-robot interaction rule, considered part of the robot. And, if there is bumper zone contact against unprotected robot, it is considered to be incidental bumper zone contact according to <G32-C> and therefore not a penalty. Note that if the contact is excessive or violates some other portion of the rule, a penalty may be assigned anyway.

Know the rules before you act on them/publish misinformation.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk

Reply With Quote
  #34   Spotlight this post!  
Unread 19-01-2009, 23:21
Andy L's Avatar
Andy L Andy L is offline
Registered User
FRC #1458
Team Role: Alumni
 
Join Date: Mar 2007
Rookie Year: 2006
Location: Danville
Posts: 348
Andy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud ofAndy L has much to be proud of
Send a message via AIM to Andy L
Re: pic: Ball Harvester

Am I the only one confused as to the dispute over the bumper legality? Didn't the GDC specifically say that the bumper configuration is illegal? And wouldn't you knowing this and still trying to dispute with your inspector be a little immoral?
Reply With Quote
  #35   Spotlight this post!  
Unread 19-01-2009, 23:34
ChuckDickerson's Avatar
ChuckDickerson ChuckDickerson is offline
Mentor / Bayou & CMP Division LRI
FRC #0456 (Siege Robotics)
Team Role: Mentor
 
Join Date: May 2004
Rookie Year: 2004
Location: Vicksburg, MS
Posts: 877
ChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond repute
Re: pic: Ball Harvester

Angled bumper debate aside, wouldn't a design of this type be illegal IF the roller (or parts of it like the pneumatic tubes in this example) touched a trailer? It is my understanding that the ONLY thing the robot is allowed to touch on the trailer is the BUMPER and then ONLY with the BUMPERS of the robot. If an intake roller mounted near the front edge of a robot intake opening touches the trailer (BUMPER or not) isn't it illegal? Due to the height of the BUMPERS (7") and diameter of the balls (~8.5") doesn't this severly limit the placement and design of intake rollers placed near the edge of a robot?
Reply With Quote
  #36   Spotlight this post!  
Unread 19-01-2009, 23:38
MrForbes's Avatar
MrForbes MrForbes is offline
Registered User
AKA: Jim
FRC #1726 (N.E.R.D.S.)
Team Role: Mentor
 
Join Date: Feb 2006
Rookie Year: 2006
Location: Sierra Vista AZ
Posts: 6,029
MrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond repute
Re: pic: Ball Harvester

Yes, it sound like the intake rollers would need to be more than 7" high, at the lowest point. Pokey grippy thingys might be a problem, if they're too long.
Reply With Quote
  #37   Spotlight this post!  
Unread 20-01-2009, 08:17
GaryVoshol's Avatar
GaryVoshol GaryVoshol is offline
Cogito ergo arbitro
no team
 
Join Date: Aug 2005
Rookie Year: 2000
Location: Royal Oak, MI
Posts: 5,757
GaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond reputeGaryVoshol has a reputation beyond repute
Re: pic: Ball Harvester

We're using <R32> "ROBOT to ROBOT Interaction" to describe ROBOT to Trailer interaction, but that seems to also be the way the GDC is doing it.

Quote:
Originally Posted by <R32>
B. Contact within the BUMPER ZONE is generally acceptable.

C. If a portion of the BUMPER PERIMETER polygon is unprotected by BUMPERS, any contact by another ROBOT within the unprotected region (including the vertical projection of the unprotected region) will be considered incidental contact and will not be penalized.
Quote:
Originally Posted by 8.2 Definitions
BUMPER ZONE – the volume contained between two virtual horizontal planes, one inch above the floor and seven inches above the floor.
The BUMPER ZONE extends both outside and inside your robot. The portion of your robot between 1 and 7 inches off the floor is included in your BUMPER ZONE.

Therefore one could argue that contact between 1 and 7 inches off the floor should be considered incidental.
__________________
(since 2004)
Reply With Quote
  #38   Spotlight this post!  
Unread 20-01-2009, 15:32
ChuckDickerson's Avatar
ChuckDickerson ChuckDickerson is offline
Mentor / Bayou & CMP Division LRI
FRC #0456 (Siege Robotics)
Team Role: Mentor
 
Join Date: May 2004
Rookie Year: 2004
Location: Vicksburg, MS
Posts: 877
ChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond repute
Re: pic: Ball Harvester

I have re-read the rules and agree that <G32> defines what is and isn't allowed concerning ROBOT-to-ROBOT and ROBOT-to-TRAILER interactions. For reference this is the whole rule:

------------------------------------------------------------------------
Quote:
<G32> ROBOT to ROBOT Interaction - Strategies aimed solely at the destruction, damage, tipping over, or entanglement of ROBOTS or TRAILERS are not in the spirit of the FRC and are not allowed. In all cases involving ROBOT-to-ROBOT or ROBOT-to-TRAILER contact, the TEAM may receive a PENALTY and/or their ROBOT may be disqualified if the interaction is inappropriate or excessive. However, it is noted that Lunacy is a highly interactive game. Robust construction of ROBOTS will be very important in this high-speed competition. ROBOTS should be designed to withstand the contact that will occur during the MATCH. Appropriate contact is allowed under the following guidelines:

A. High speed accidental collisions may occur during the MATCH, and are an expected part of the game.

B. Contact within the BUMPER ZONE is generally acceptable.

C. If a portion of the BUMPER PERIMETER polygon is unprotected by BUMPERS, any contact by another ROBOT within the unprotected region (including the vertical projection of the unprotected region) will be considered incidental contact and will not be penalized.

D. Contact with a tilted or tipped ROBOT outside the BUMPER ZONE (particularly by the BUMPERS of the contacting ROBOT) will generally be considered incidental contact and will not be penalized.

E. Contact outside of the BUMPER ZONE is not acceptable, and will result in a PENALTY. The offending ROBOT may be disqualified from the MATCH if the offense is particularly egregious or if it results in substantial damage to another ROBOT.

F. A ROBOT may not attach to and/or climb onto a ROBOT or TRAILER. Doing so will be interpreted as an attempt to damage an opposing ROBOT, and will be penalized as such.

G. Use of any sloped or angled feature of the ROBOT as a wedge to overturn an opposing ROBOT or TRAILER is explicitly prohibited, and will be assigned a PENALTY.
------------------------------------------------------------------------

I have bolded the parts I am using to draw my conclusions below:

1) Even though the rule is titled "ROBOT to ROBOT Interaction" by including the bolded "ROBOT-to-TRAILER" it is clear from the beginning that they are including robot to trailer interactions in this rule, however, robot to robot and robot to trailer interactions are somehow different since they specifically list them separately.

2) Section "E" clearly states that contact outside the BUMPER ZONE is not acceptable. There is no distinction made between ROBOTs and TRAILERs thus, since the rule is discussing the interactions of both, I have to assume that contact outside the BUMPER ZONE of the TRAILER is not allowed. This seems to be supported by this Q&A as well.

3) Section "C": "If a portion of the BUMPER PERIMETER polygon is unprotected by BUMPERS, any contact by another ROBOT" would imply ROBOT-to-ROBOT since TRAILERS have BUMPERS all the way around. There is no mention of TRAILER in section C. "another ROBOT" must mean that there is a one ROBOT to begin with, thus 2 ROBOTs, NOT a ROBOT and a TRAILER. Therefor section "C" does not define any "incidental contact" between ROBOTs and TRAILERs.

4) Section "D": Again only refers to ROBOTS. There is no mention of TRAILERS anywhere in "D". We better not run into a tipped over trailer and contact anything other than the (now semi vertical) bumpers.

By the combination of these parts of <G32> I have to come to the conclusion that the intent of this rule is to restrict ROBOT contact with the TRAILERs to BUMPER-to-BUMPER only. The rule is very careful to refer to ROBOTs and TRAILERs separately where desired. It is thus a false assumption that ROBOTs = TRAILERs as far as the "rules of engagement" go. FIRST cannot control or even conceive of how every team will construct their robots. It is perfectly logical to think that there may be two "U shaped"/"Open Front" robots on the field at the same time. It is also conceivable that the two "U shaped fronts" may come in contact with each other such that the legal bumpers of one robot protrude inside the legal width front "gap" of the other robot and make contact inside the robot with something other than a bumper. I conclude this to be the "incidental contact" referred to in section "C". Basically, if you build a robot with a gap within the BUMPER ZONE and another robot enters that area that is your problem, not FIRST's. However, we are all given detailed dimensional drawings of the trailer so we can't claim we didn't know what it looked like, how big it was, or how it was built. What I BELIEVE the GDC intent is to limit all contact with the trailer to the bumper only. I would even be willing to bet that at inspection there will be a legal TRAILER that will be pushed into and around your ROBOT and you better have designed it such that nothing but the BUMPERS of the trailer can touch your ROBOT inside and out. In other words, if you have an opening on the front of your robot such that the trailer can partially go inside your robot there is no such thing as "incidental contact" outside the bumper zone. The whole point of the drawings in Update #2 was to make sure we understood that the trailer bumper couldn't touch anything inside/under/etc. our robots, only the legal front minimum 6" bumpers. If you have an intake roller near the front of your robot with protrusions on it designed to grab the balls and pull them into your robot you better be careful that they can't touch the bumpers (or any other part) of the trailers.

Of course, this is just my interpretation of the rules. If others feel my logic is flawed in this interpretation please correct me.
Reply With Quote
  #39   Spotlight this post!  
Unread 20-01-2009, 16:22
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,819
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: pic: Ball Harvester

Quote:
Originally Posted by DeepWater View Post
Of course, this is just my interpretation of the rules. If others feel my logic is flawed in this interpretation please correct me.
I'm going to offer a counter-argument here to some of your points, but not others. I've quoted the parts I refer to; I had the rules open while I answered.

I first look at each section of <G32> individually. Where appropriate, I comment on the above interpretations.

<G32>: General contact rule; all sub-rules are specific cases of this rule. I would argue that they specify robot-trailer to specifically include the trailer, so that teams are without excuse if they beat up the trailers, not to differentiate between robot-robot and robot-trailer contact.
<G32-A>: general expectation. It is NOT specific to either robot or trailer.
<G32-B>: general permissible contact volume. Again, not specific.
<G32-C>: Regarding unprotected areas of the bumper perimeter. Trailers have none, as they will be close enough to the towing robot to protect the tongue. Robots may. What's to stop an opponent from attempting to give a penalty by backing or swinging a trailer into an opening in the bumper perimeter, or worse, doing damage that way, if read as you interpret it? I would argue that the GDC wrote this for robot-robot interaction and overlooked it for robot-trailer interaction. They anticipated that the spirit of the rule would be understood.
<G32-D>: tilted/tipped robots. See my response on <G32-C>.
<G32-E>: outside of bumper zone contact. Not specific to either robot or trailer. Your interpretation is correct.
<G32-F>: climbing on robots/trailers. The first one to specifically instead of generally include the trailer.
<G32-G>: wedging robots/trailers. Also specifies both.

Only two sub-rules specify both robots and trailers, but the overall rule covers both. Three of the seven are general, mentioning neither. The other two rules are in spirit covering both, though not necessarily by letter. This has been known to happen before.

As for your conclusions, I separate them out piecemeal, to discuss them more easily.

1) "...intent of this rule is to restrict ROBOT contact with the TRAILERs to BUMPER-to-BUMPER only." The intent of the rule is to govern the entire contact between robots and either other robots or trailers, not to specify one particular type of contact between robot and trailer.

2) "It is thus a false assumption that ROBOTs = TRAILERs as far as the "rules of engagement" go." Where do you get this? As I said above, three rules are general, not counting the primary rule, and two more cover both the same.

3) "It is also conceivable that the two "U shaped fronts" may come in contact with each other such that the legal bumpers of one robot protrude inside the legal width front "gap" of the other robot and make contact inside the robot with something other than a bumper. I conclude this to be the "incidental contact" referred to in section "C"." This is part of the incidental contact. It is also conciveable that a team has no bumpers on one side of their robot, save at the corners, and a trailer accidentally, through no fault of either team, jams in there. I have a hard time thinking that that would be penalized. If it is, so be it, but in the past, it wouldn't be.

4) "What I BELIEVE the GDC intent is to limit all contact with the trailer to the bumper only." Remember that the trailer has bumpers all the way around. Which bumper, the one on the robot or the one on the trailer? If a trailer contacts a side of the robot that isn't protected, is that a penalty? I BELIEVE that the GDC's intent is to limit all contact to the bumper zone only.

5) "I would even be willing to bet that at inspection there will be a legal TRAILER that will be pushed into and around your ROBOT and you better have designed it such that nothing but the BUMPERS of the trailer can touch your ROBOT inside and out." I am equally willing to bet that there won't be one. Why? Extra weight to haul around, one more thing to be assembled at competition, and if anything other than bumpers can contact your robot, then I would suspect that you're awful close to an <R11> or <R08> violation anyway.

6) "In other words, if you have an opening on the front of your robot such that the trailer can partially go inside your robot there is no such thing as "incidental contact" outside the bumper zone." Where do you draw this from? The other rules, for example <G29>, don't say anything about this. You can push or react against any arena elements, and the trailer is an arena element.

7) "The whole point of the drawings in Update #2 was to make sure we understood that the trailer bumper couldn't touch anything inside/under/etc. our robots, only the legal front minimum 6" bumpers." The GDC has said repeatedly that those drawings are for illustrative purposes only. Attempts to draw anything more from them are frowned upon.

8) "If you have an intake roller near the front of your robot with protrusions on it designed to grab the balls and pull them into your robot you better be careful that they can't touch the bumpers (or any other part) of the trailers." This is more correct, as this could be construed as gabbing a trailer.

In short, I think that you're close, but a miss is as good as a mile. I think that <G32> covers both robot-robot and robot-trailer contact and treats them equally.

My apologies for the long post.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk

Reply With Quote
  #40   Spotlight this post!  
Unread 20-01-2009, 23:35
falconmaster's Avatar
falconmaster falconmaster is offline
Registered User
AKA: Ledge
FRC #0842 (Falcon Robotics)
Team Role: Teacher
 
Join Date: Jan 2004
Rookie Year: 2001
Location: Phoenix, Arizona
Posts: 1,406
falconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond reputefalconmaster has a reputation beyond repute
Send a message via MSN to falconmaster
Re: pic: Ball Harvester

OK, we have beaten to death. We will change our bot's front to have a six inch flat side on each side of our harvester's opening. It looks like it will not make too much of a difference , only ball's a ball width. We will just have to drive better! It was great watching all you debate the issue though, but if we stay with our design, we will loose the argument. We will bring our old angled side however in case we see the inspectors change their interpretation. Thanks all.
__________________
Faridodin "Fredi" Lajvardi KD7WKD
Reply With Quote
  #41   Spotlight this post!  
Unread 21-01-2009, 00:48
ChuckDickerson's Avatar
ChuckDickerson ChuckDickerson is offline
Mentor / Bayou & CMP Division LRI
FRC #0456 (Siege Robotics)
Team Role: Mentor
 
Join Date: May 2004
Rookie Year: 2004
Location: Vicksburg, MS
Posts: 877
ChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond reputeChuckDickerson has a reputation beyond repute
Re: pic: Ball Harvester

Eric, thanks for the great post in direct response to mine. Our two posts clearly show how two people can read the same words (rules) and come to two different conclusions. After reading your thoughtful and detailed response I can see how you arrived at your conclusions. However, not being able to read the minds of the GDC our team is opting to play it safe and is continuing to design and build our robot such that any contact between our robot and the trailer is bumper to bumper only (as long as the trailer is in it’s normal playing configuration). Does this limit our design possibilities? Probably, but we would rather be safe than sorry. We think we have a pretty good plan though.
Reply With Quote
  #42   Spotlight this post!  
Unread 21-01-2009, 01:05
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,819
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: pic: Ball Harvester

Quote:
Originally Posted by DeepWater View Post
Eric, thanks for the great post in direct response to mine. Our two posts clearly show how two people can read the same words (rules) and come to two different conclusions. After reading your thoughtful and detailed response I can see how you arrived at your conclusions. However, not being able to read the minds of the GDC our team is opting to play it safe and is continuing to design and build our robot such that any contact between our robot and the trailer is bumper to bumper only (as long as the trailer is in it’s normal playing configuration). Does this limit our design possibilities? Probably, but we would rather be safe than sorry. We think we have a pretty good plan though.
Definitely play it cautious if you aren't sure. If nothing else, we showed how the contact rule needs work if they ever try trailers again. I also saw how you came to your conclusions. As it is written, both interpretations are valid without further clarification from above.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk

Reply With Quote
  #43   Spotlight this post!  
Unread 22-01-2009, 02:19
tacopaco789's Avatar
tacopaco789 tacopaco789 is offline
Build Captain/Driver
AKA: Kyle
FRC #0624 (Cryptonite)
Team Role: Driver
 
Join Date: Feb 2007
Rookie Year: 2004
Location: Katy Texas
Posts: 15
tacopaco789 will become famous soon enough
Send a message via AIM to tacopaco789 Send a message via Yahoo to tacopaco789
Re: pic: Ball Harvester

Just seeing that frame tells me that this belongs to the falcons. Light weight and sturdy. Same style from when we where allied with you in Phoenix the 2005 regional. Love it. lol

Kyle

Team 624
2007 Pit captain
2008 Build Captain
2008 Driver
__________________
Reply With Quote
  #44   Spotlight this post!  
Unread 22-01-2009, 09:54
ebarker's Avatar
ebarker ebarker is offline
Registered User
AKA: Ed Barker
FRC #1311 (Kell Robotics)
Team Role: Mentor
 
Join Date: Jan 2006
Rookie Year: 2006
Location: Kennesaw GA
Posts: 1,437
ebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond reputeebarker has a reputation beyond repute
Re: pic: Ball Harvester

To put Eric's comments into a nutshell -

a) a trailer is field equipment

b) thou shalt not damage field equipment

c) it has been so since the beginning of time.

I'd say that is the root cause of the GDC reasoning, rules and decisions on the matter.
__________________
Ed Barker
Reply With Quote
  #45   Spotlight this post!  
Unread 22-01-2009, 10:04
JesseK's Avatar
JesseK JesseK is offline
Expert Flybot Crasher
FRC #1885 (ILITE)
Team Role: Mentor
 
Join Date: Mar 2007
Rookie Year: 2005
Location: Reston, VA
Posts: 3,712
JesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond reputeJesseK has a reputation beyond repute
Re: pic: Ball Harvester

Here's a tidbit we've found:

We've found that while on a slick surface, about half the time the orbit balls run away when they're hit wrong by the harvester fingers ... so having the roller edge @ 9" off the floor with the fingers extending down to 7.5" is our best solution. The harvester roller edge is 8" from the opposite conveyor side though, so the ball is under slight compression while in the conveyor.

Are you guys integrating tubing/belting in between the fingers for the conveyor? If so, have you solved the issue of the belting getting caught on the harvester fingers? That's our next thing to tackle.
__________________

Drive Coach, 1885 (2007-present)
CAD Library Updated 5/1/16 - 2016 Curie/Carver Industrial Design Winner
GitHub
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
pic: CD 7 ball harvester BlazinFire47 Extra Discussion 21 14-05-2012 09:56
Knocking off a ball while possesing a ball Joe Ross Rules/Strategy 25 10-03-2008 18:49
WHere do you get Ball Casters/ BAll Transfers for FRC?!?!?!? leehyungjin4u General Forum 3 15-01-2008 23:27
Chief 47 ball harvester 2002 pics ajlapp Robot Showcase 6 11-01-2006 15:34
2X Ball Into the Ball Release MikeDubreuil Rules/Strategy 23 28-03-2004 19:31


All times are GMT -5. The time now is 05:36.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi