<R18>

[ZakuAce]

part B states:

The Trailer Hitch must be rigidly attached to a fixed location on the ROBOT, with the long dimension of the Trailer Hitch horizontal and the opening of the C-channel facing away from the ROBOT. The horizontal center line of the Trailer Hitch must be 2-13/16 inches above the floor.

But if you build a robot with a 6 wheel design, with a drop down middle wheel, the robot would pivot and therefore the height of the hitch would change. Anyone have ideas/opinions? The rest of my team thinks that the change in height will be small enough to be irrelevent, but I want to be sure.

I'd post this on the Q&A myself, but no one knows the password to get on.