|
Re: pic: What are we up to? FRC1771
Thanks everyone. I kinda left off the specs so here goes:
-6wd with a dropped center wheel and the center wheel is directly driven off of highly modified tough boxes
-The frame was designed so that everything was aligned by tabs for easy assembly and boat building epoxy was used
-This frame is much stiffer than our custom 1/4" thick aluminum frame last year for an approximately 10lb weight savings.
As for whats going on top, it is eerily similar to what you guys have already posted up with a few differences. Mainly we will be able to shoot downwards at a 40 degree angle without reducing the speed of our shooter. Hopefully everything comes together
O and this is bot #2...the real thing will be even nicer
__________________
Mentor 2415
Last edited by sdcantrell56 : 22-01-2009 at 21:16.
|