|
|
|
 And then, at the end of the match, the drive teams who are being lifted all say at once (in a GOVERNATOR voice)- "GET TO ZE CHOPPER!!!" - Graham Donaldson [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| And then, at the end of the match, the drive teams who are being lifted all say at once (in a GOVERNATOR voice)- "GET TO ZE CHOPPER!!!" - Graham Donaldson [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Dead DS
today I came in and the driver station was frozen (or at least appeared that way). The robot would not be controled and the enable/disable switch did not work.
I unplugged and plugged in the DS and now the screen is blank (backlit but blank). I have given it time and it still does not boot up. I have tried rebooting with various configurations of plugged in/unplugged devices and nothing works. I'm really stuck on this one. 
|
|
#2
23-01-2009, 12:30
|
|||||
|
|||||
|
Re: Dead DS
I've seen one like that too.
The only recourse is to contact FIRST and KwikByte to send it back for repair. It may be due to static discharge if your work area is too dry and has carpet.
|
|
#3
24-01-2009, 10:02
|
|||
|
|||
|
Re: Dead DS
Hey,
Today when our team was playing with it, we somehow managed to make it work again. We tried holding down the Select button while powering on the DS, and it magically reset it and started working. After doing this the DS works normally. We are not sure why its working now, but it is.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| dead rcx#2 | robbie thompson | Lego Mindstorm Discussion | 2 | 31-05-2005 07:49 |
| Dead battery! | krhs_programmer | Electrical | 19 | 11-02-2005 07:31 |
| Dead OI | Smrtman5 | Control System | 1 | 30-10-2004 00:39 |
| Dead Reckoning | Ryan Cumings | Programming | 3 | 24-02-2004 10:57 |
| Dead Reckonin | Hop_of_752 | Programming | 3 | 08-02-2004 19:28 |
Linear Mode
