Accerometer Problems

[drkiraco]

the x, y, and z axes should be independent so this is likely not your problem. but, it is possible that maybe you did a bad soldering job or something. If you hook all three up and two work and one does not then you know where to look for the problem. If you hook all three up and none works then you are probably wiring it up backwards or not using the correct code to read it.

Originally Posted by VeedotJaydot

we're having problems hooking up the accelorometer and getting it to return an actual value. We only have the y axis row hooked up to the analog module through a PWM cable, so we're thinking that the fact that we don't the x and z axis hooked up maybe hindering us. In summation: how, specifically, should the accelorometer be wired to the Crio?