|
|
|
 Don't short change your drivers. They really need drive time. - Joe Johnson [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Don't short change your drivers. They really need drive time. - Joe Johnson [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Programming the Jaguars
Hey everybody,
We just finished making our custom gearboxes and mounts for the propellors that will drive our robot. We have the Jaguars hooked up, and the props connected to those. All of the electrical is right, and we have a PWM connecting the Jaguar to PWM 1 on the Sidecar attached to Input 4 on the cRIO. We have programmed a program, and deployed it on the robot. When we set the throttle to max, the Jaguar activates (the LED turns solid green), and the fan begins turning at 2 RPM. Any ideas as to why the prop isn't moving at the speed we want it to? 
|
|
#2
24-01-2009, 18:41
|
|||||
|
|||||
|
Re: Programming the Jaguars
That would probably be a mechanical issue not a programming issue.
The battery could be weak, but if the Jaguar is showing green, programming is giving it's all.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Jaguars...is this ok? | jngleofinsanity | Electrical | 15 | 09-02-2010 21:12 |
| Advantages of the Jaguars? | EricVicenti | Electrical | 36 | 03-03-2009 20:16 |
| Connecting to cRio, getting the jaguars to go solid yellow.... then nothing. | DSST\neal.ian | FRC Control System | 11 | 30-01-2009 18:15 |
| Jaguars working with 2.4 Ghz R/C | NOV8R | Technical Discussion | 0 | 09-01-2009 16:15 |
Linear Mode
