Downloading code DS says "No Code"

[C222]

We've had this problem a few times with our bot. It's usefull to have a serial connection to a terminal on the programming computer. During boot-up, if it says it "unloads" your code, there is probably part of the code the cRio didnt like. Generally, for my team, it was because of an "inline" function.

[Analog]

Originally Posted by C222

We've had this problem a few times with our bot. It's usefull to have a serial connection to a terminal on the programming computer. During boot-up, if it says it "unloads" your code, there is probably part of the code the cRio didnt like. Generally, for my team, it was because of an "inline" function.

Is there a document that tells how to use the serial interface, and what information the interface yields?

[Mark McLeod]

Directions are found in the Control System Manual Chapter 5 Configuration in section 5.4.1, cRIO Console Serial Connection to Laptop

[Analog]

Originally Posted by Mark McLeod

Directions are found in the Control System Manual Chapter 5 Configuration in section 5.4.1, cRIO Console Serial Connection to Laptop

Thanks. There is also a more detailed account at NI for those following this thread:

http://zone.ni.com/devzone/cda/tut/p/id/6537