pic: Team 935 Chasis

Sebastian1646 · #1 24-01-2009, 17:46

It is a sweet chasi but it weighs almost 25 pounds isn't that a bit heavy for just the chasi... i don't know but i think i would put that weight into other things.

Akash Rastogi · #2 24-01-2009, 18:05

Quote:

Originally Posted by Sebastian1646

It is a sweet chasi but it weighs almost 25 pounds isn't that a bit heavy for just the chasi... i don't know but i think i would put that weight into other things.

Not really...I've seen a lot heavier.

Its chassis btw

RoboGeek99 · #3 24-01-2009, 18:38

WOW!!! I think im in love with that chassis...its a beaty and it looks like its really well thought out

waialua359 · #4 24-01-2009, 19:06

Beautiful. Reminds me of team 75's work.

ironbears · #5 24-01-2009, 20:34

a true machinist handles that we ran our machine for 12 hours today. nothing unusual

R.C. · #6 24-01-2009, 20:51

Quote:

Originally Posted by ironbears

a true machinist handles that we ran our machine for 12 hours today. nothing unusual

That may be true but machining out plates is a lot harder than doing 1x2 tubes. We have a router (thatz why probably) and are those sides waterjetted or Cnc'd. Just wanting an official word from the team Cory. Also most teams don't have a CNC and a 12 hour day is a lot for a FIRST team. On the brighter note, that chassis is so sick!!!!

.

Cory · #7 24-01-2009, 21:00

Quote:

Originally Posted by rc_cola1323

That may be true but machining out plates is a lot harder than doing 1x2 tubes. We have a router (thatz why probably) and are those sides waterjetted or Cnc'd. Just wanting an official word from the team Cory. Also most teams don't have a CNC and a 12 hour day is a lot for a FIRST team. On the brighter note, that chassis is so sick!!!!

.

Almost definitely milled. the pockets are far too smooth/shiny for a waterjetted surface.

R.C. · #8 24-01-2009, 21:04

True, just enlarged the pic after your comment.

hipsterjr · #9 25-01-2009, 00:29

just had to say, that chassis is the sexy. I extend my sincerest props to the machinist.

railerobotics · #10 25-01-2009, 23:11

thanks for the comments, i know that our machinist's really appreciate that comments. and yes, those are handles in the chassis

daltore · #11 27-01-2009, 22:06

So THIS is where that pile of shavings came from.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Team 935 Electronics	DustinB_3	Robot Showcase	17	09-02-2008 23:27
Team 935 as of 2-2-2008	DustinB_3	Robot Showcase	19	04-02-2008 17:19
Vid: Team 935 07 Bot	JoelGoering	Robot Showcase	12	24-02-2007 20:33
pic: 935 RaileRobotics robot on ship day	railerobotics	Extra Discussion	5	20-02-2007 15:18
Image Discuss: Team 27's 2003 Bare Chasis	CD47-Bot	Robot Showcase	4	07-02-2003 00:35