Control System Stopped Working after switching into Auto mod - Was: Help were stumped

[Tack610]

the battery says 00.00V which is what it said when it still worked. For a time being it had said 00.19V i dont know what that means though.

[Alan Anderson]

Originally Posted by Tack610

The buttons on the joystick still light up the LED's on the cRIO...

Can you elaborate on that?

Originally Posted by Tack610

the battery says 00.00V which is what it said when it still worked. For a time being it had said 00.19V i dont know what that means though.

That means you don't have battery voltage going to the battery monitor circuitry on the analog breakout plugged in to the analog input module installed in slot 1 of the cRIO. Make sure the I7 selection jumper is installed between the outer two pins on that breakout, and make sure you have power to the WAGO connector on that breakout.

[Wayte]

OK, umm the cRIO has the LED's on one of the slots, and when you press the buttons on the joystick the the lights go on and off. But the joysticks arent responding to the jaguars and weve even replaced the jaguars

[Tack610]

Ok se weve tested the joysticks and they are working correctly. What does the "being zapped" have to do with the DS? like what does that typically do the the DS?