Compressor NOT Working (multiple trials already)

[Noel]

When I did the programming, we hooked everything up to the defaults:

Solenoid Channel:1
Pressure Switch: DIO 1
Relay Channel: 1

But, it didn't work.

So, we went to the labview example program, to see if it was just our code or what, and it still didn't work. The compressor did not come on. We tried re-wiring, changing the channels, all of that.

We can't get the relay to fire even though it's plugged into the Digital Side car, the relay nor the compressor is working. But, the solenoid is. (finally).

We've also searched through Chief Delphi for an answer, but we haven't really found one that helped. Oh, and we also check out all of the diagrams and stuff in the manuals...but we could have missed something who knows.

Thanks!
RoboDoves (2528)