|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
|
|||
|
|||
|
Re: Driver Station/Control System not Communicating
If this is still repeatable and the cables and connectors are good, the next culprit may be the enet connectors on the device. while pinging, try putting small amounts of pressure on the enet plugs on the DS. Do the other devices too, but my first place to test would be the DS. See if you can cause all failures or all successes with the pressure. It may indicate a loose connection within the device.
Greg McKaskle |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| driver station control suitcase | lenny8 | General Forum | 12 | 06-02-2009 11:43 |
| Driver Station Not Updating | elbuo | FRC Control System | 8 | 13-01-2009 18:39 |
| Driver Station not allowing team number change | Bryan Herbst | FRC Control System | 2 | 04-01-2009 12:26 |
| Top Ten Things NOT to do with the 2009 FRC Control System | Vince | FRC Control System | 9 | 16-12-2008 17:08 |
| Help: IFI loader not communicating with control unit | red_alert_13 | Programming | 9 | 20-01-2006 17:30 |