Suddenly disabled?!?

[lynca]

Originally Posted by Mr. E

Things were going smoothly, (for the most part,) so far during our building and programming. We successfully got the robot to move for two days in a row. The next step was to get the compressor working. (We already had the program with no errors, but it wasn't working when deployed.) I changed just one or two things in the compressor program and suddenly, our team light is blinking slowly which means it is disabled. The robot won't even drive now! We changed some things and nothing. So, we put everything back to the way it was, but the light is still blinking slowly and the robot won't drive. Can anyone offer some help? Any advise would be appreciated.

When you post you should be more descriptive of whats working and the status of your problem. When your refer to "light blinking slowly" is that the RSL light on the digital sidecar ?

If so , check the RSL light debug codes.
http://decibel.ni.com/content/docs/DOC-3120

If you are referring to RSL light, we had a similar problem today. We found that simply re-imaging the cRio was the only solution.

I'm curious how many teams are having to re-image when all else fails?