|
|
|
 Ok, so you are going to use a robot to hold all of those rivets together? - gblake [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Ok, so you are going to use a robot to hold all of those rivets together? - gblake [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Problems with the connections to the Keyang motor
We are using a Keyang motor(Keyang motor,12-tooth , PN: 16631023 ,Flowers Tote) in this year's robot, and we are having problems connecting it to power.
Last year's connectors to this motor do not seem to fit and we do not have a clue on where can we find this connector... Did anyone encounter this problem too? Because we prefer no to weld the cable to the motor. I would appreciate your quick response, Nofar Hamrany, NEAT-TEAM #1943, ISRAEL 
|
|
#2
01-02-2009, 13:21
|
||||
|
||||
|
Re: Problems with the connections to the Keyang motor
Here's a thread on that subject.
Soldering directly to the terminals, when done carefully, is considered a reasonable alternative.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Power connections for Keyang motors | aeasson | Motors | 7 | 16-02-2008 18:35 |
| How to use the keyang motor | program1 | Motors | 1 | 24-01-2008 22:42 |
| Problems with the manual of the green target (for cmu cam) | Kawashima | Kit & Additional Hardware | 1 | 28-01-2007 13:31 |
| problems mounting the camera to the 'bot with the default servo/mount set up | Redneck | Programming | 0 | 16-02-2005 20:53 |
| What's with the New Motor Specs for the Atwood Mobile (Chiaphua) Motor. | Robb Gerber | Motors | 2 | 23-01-2002 08:58 |
Linear Mode
