|
|
|
 Gatting your senior pic with robot = (Cool factor * infinity).
:cool: - Elgin Clock [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Gatting your senior pic with robot = (Cool factor * infinity).
:cool: - Elgin Clock [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Drill Motor Gearbox Problems...
Our team has been having some problems with one of our drill motor gearboxes. The problem was that one of the clutches was slipping quite easily even though it was set to the highest setting.
 We disassembled the clutch mechanism to discover some missing parts. Luckily we had these parts on hand from spare FIRST gearboxes.  It occurred to me that this may not be an isolated incident. I just want to be sure no other teams are having this same problem. We discovered our problem when one of our gearboxes exhibited a clicking noise while under modest loads. Upon disassembly we found the steel plate that resides between the clutch balls and the clutch spring was missing along with the plastic part that holds the index spring in place. When we got this gearbox we also notices that one of the two screws that holds the whole clutch together was missing. 
|
|
#2
16-10-2001, 06:17
|
|||
|
|||
|
Ouch!
See other posting regarding drills.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Portable cordless drill press | Gui Cavalcanti | Technical Discussion | 25 | 03-08-2003 22:21 |
| drill motor mounts- again | Jeff Sharpe | Motors | 6 | 07-04-2003 23:20 |
| Emergency drill trade/sell | Anarkissed | General Forum | 3 | 16-02-2003 22:37 |
| More drill motor problems, jeeze. | blindguy | Motors | 4 | 12-02-2003 09:06 |
| A new record for breaking a drill motor | ZacharyD | Technical Discussion | 23 | 16-01-2003 16:58 |
Linear Mode
