No RSL on Digital Sidecar

[popo308]

Originally Posted by shobuda999

Our team is having a serious problem. our RSL is not lighting up at all. We have ran through the benchtop test, and had everything working wirelessly. We have all the latest Labview updates and have successfully deployed the default code. We have the most recent DS update. When we put our hardware into our robot however we noticed our PWM's aren't getting a signal. After doing some research I realized that our digital side car didn't have the robot status light illuminated at all. We switched it out with the other board in the kit, but we are having the same results. We're beginning to worry that the CRio is dead. All the power lights are on solid green, and we have the board connected to slot four of the CRIO. Has anyone experienced this?

Originally Posted by shobuda999

All the power lights are on solid green

Are you talking about the lights on the DSC?

if not...
be sure you have the 12v input on the DSC powered. We forgot to do this once and had the same symptoms...