No Idea what's wrong!

EuTu · #1 04-02-2009, 14:44

This is probably a combination of programming and/or electrical. All of the wires are connected correctly, as per the diagram at least. I am also 'feeding' the watchdog, and the driverstation reads 00.00 V and when i try and output anything tothe console right now is shows a 0x160a68 task, errno 70 or 71. What is the 70,71 mean, and how can i get the robot to run. I configured the cRIO to work with the router, and everything works because it allows me to connect to the cRIO and download code/undeploy code. I am desperate, ive tried literally everything to get the robot to run, and still doesn't!

Mike Betts · #2 04-02-2009, 15:05

I'm note sure about the error numbers you report but in general:

1. Did you update to 3.0a for Labview?
2. Did you successfully reimage the cRIO afterward?

Regards,

Mike

EuTu · #3 04-02-2009, 15:17

I use WindRiver, I imaged it as soon as i connected it. Now, nothing is working. The Jaguar lights aren't solid anymore, they're blinking.

EuTu · #4 04-02-2009, 15:27

IT WORKS!! sorry, thanks.

Mike Betts · #5 04-02-2009, 15:59

Please post the reason so that others can learn from your experience...

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Figure out what's wrong with the IR board	sparrowkc	Electrical	5	17-02-2008 12:29
What's Wrong with our Gyro???	manderson5192	Programming	4	08-02-2008 09:08
pic: What's wrong here?	Branden Ghena	Extra Discussion	15	30-03-2007 11:20
pic: What's wrong with this picture - Why were we shut off?	CD47-Bot	Extra Discussion	12	04-10-2004 19:16
"What's It" Game Idea	sanddrag	Games/Trivia	0	21-07-2004 01:28