"simple" button problem

Cecil · #1 05-02-2009, 20:48

Here is what our team would do to set the relay. On the false side of the case, it just has it set the relay back to off. Hope this helps you out.

star_lancer · #2 07-02-2009, 10:56

Quote:

Originally Posted by Cecil

Here is what our team would do to set the relay. On the false side of the case, it just has it set the relay back to off. Hope this helps you out.

Hey, this is jolly good and all, but the people here at 2346 are confused what you did there, we can't get most of those items to show up in labview.

Greg McKaskle · #3 07-02-2009, 11:01

What items can you not find?

Greg McKaskle

rfry11 · #4 07-02-2009, 13:09

I'm with 2791, and I cannot seem to find the "thing" (for lack of a better word) that you used to select the button. If i'm being vague, I've attached a button to better show what exactly I cannot seem to find.
Thanks In Advance!

AndrewN · #5 07-02-2009, 13:34

It's called "Unbundle by Name" and can be found in the third box "Cluster, Class and Variant" under 'Programming" on the functions pallet.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Different "Cam Suddenly Stops" Problem	JohnC	Programming	10	30-01-2007 21:37
New NEMO White Papers! "Creating a Killer Packet" and "25 Ways to Sponsor"	Jessica Boucher	Team Organization	0	10-08-2005 10:55
IFI Loader problem - "Invalid HEX file"	wun	Programming	9	22-09-2004 12:35
"Thunderbirds" Vs. "Team America" Which one will rule the box office?	Elgin Clock	Chit-Chat	3	07-09-2004 19:53
Potential Problem with "fighting over the goal"	Kyle Fenton	General Forum	4	17-02-2002 10:21