Failed to Connect after reinstall

Blooper4912 · #1 06-02-2009, 20:00

Quote:

Error connecting to 'VxWorks6x_10.25.35.2" (Registry localhost). Failed to launch target server
Possibly caused by: Back-end not connected.

Was the message we received after reinstalling Wind River to try make the robot load our code, when it was connecting but having no noticeable impact on the actions of the robot. Now we can't connect to the cRIO at all

Fatality · #2 06-02-2009, 20:27

Make sure that you have the most recent updates not only for windriver (workbench 3.0.1718) but also the cRio (FRC_2009_v11)

gokul · #3 07-02-2009, 13:04

Quote:

Originally Posted by Blooper4912

Was the message we received after reinstalling Wind River to try make the robot load our code, when it was connecting but having no noticeable impact on the actions of the robot. Now we can't connect to the cRIO at all

Using the FRC cRIO imaging tool, change your environmnet to Windriver.

If you are able to ping your cRIO but are not able to connect through Windriver - probably you have the LabView environment loaded.

Please post your findings.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Failed Benchtop test	rhoads2234	Programming	22	10-01-2009 10:49
pic: 1625 Failed Lift	Eldarion	Extra Discussion	5	19-03-2007 00:58
Compiling Failed	Teh Mike	Programming	7	09-02-2005 13:27
pic: Failed attempt at simulation	CD47-Bot	Extra Discussion	5	17-06-2004 11:03
Life After Dean: Who Will Lead FIRST After Kamen and Flowers??	Joe Matt	General Forum	25	24-06-2002 00:12