|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
|||
|
|||
|
Re: pic: almost there
guys see my next picture for the solution....i'm posting it now
|
|
#17
|
||||||
|
||||||
|
Re: pic: almost there
ok, let me break this down easily.
Each corner must have 6 inches on either side of it And Your robot must have bumpers covering 2/3 of the robot. and the bumpers must be supported along the whole length of the wood See the attached image for a possible fix for your frame. |
|
#18
|
|||
|
|||
|
Re: pic: almost there
THANK you for the visual aide. I appreciate the assistance .... I tried to post an updated pic in this thread but i couldnt figure out how. I ended up posting another pic in a different thread... sorry
|
|
#19
|
|||
|
|||
|
Re: pic: almost there
Look at figure 8-2, upper left corner and it shows a bumper overhang with no backer.
|
|
#20
|
|||
|
|||
|
Re: pic: almost there
Currently 54" with the shooter on the turrent mounted. We may add a roller at the top but we would still be under the 60" mark.
|
|
#21
|
|||||
|
|||||
|
Re: pic: almost there
And the overhang isn't counted in the bumper length.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: Almost Tipped | TJ09 | Extra Discussion | 12 | 07-01-2008 21:53 |
| pic: Almost there... | Mandi_|<o>| | Extra Discussion | 2 | 20-02-2007 17:19 |
| pic: Team 759 CAD pic (almost finished) | oljomo | Extra Discussion | 6 | 01-03-2005 16:31 |
| pic: 1023 almost there! | CD47-Bot | Robot Showcase | 2 | 21-02-2004 17:54 |
| pic: Team 254 robot....almost there! | CD47-Bot | Robot Showcase | 7 | 18-02-2004 16:17 |