Speed Controllers

Racer26 · #1 07-02-2009, 20:05

As said before, the Jags are much more linear on the output... They're also twice as fast as the victors. 1075 is using them on our drive and steering motors. We had one smoke about 2 hours ago, no obvious reason why. Waiting on an RMA number from LM.

thefro526 · #2 07-02-2009, 20:10

We're Using 4 Jags. I Like them so far but we're prepared to switch them out to Victors if need be.

I've noticed with the Jags they're much more sensitive than Victors. When we had a programming issue that cause the signal to the Speed Controller to change every time the code Looped the Jag Jumped a Lot more than the Victor Did.

Racer26 · #3 07-02-2009, 20:12

This is because the Jags are capable of going down to 3% of full power while the Vics can only do 10%.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed controllers....	Denman	Technical Discussion	14	07-10-2004 15:19
speed controllers	archiver	2000	5	24-06-2002 00:19
Speed Controllers	archiver	2000	2	24-06-2002 00:08
Speed Controllers	archiver	2000	1	23-06-2002 23:01
Speed Controllers...	Tom Schindler	Technical Discussion	4	13-12-2001 17:26