|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Between Rounds
Will we be able to recompile code/tweak code between rounds of the competition? (practice vs competition rounds, etc? )
|
|
#2
|
|||||
|
|||||
|
Re: Between Rounds
Between matches, even. The only rules on work at competitions are that you have to work on-site or at a facility that all teams can use while the pit is open. No removing parts overnight. See <R27>. (There are some other rules as well, governing what type of work you can do/tools you can use--see Section 3. Last I checked, programming doesn't violate any of those, though.)
|
|
#3
|
|||
|
|||
|
Re: Between Rounds
Yes, you can. However, I would recommend against it unless absolutely necessary because our team has had some troubles in the past with code downloads at the last minute.
|
|
#4
|
|||||
|
|||||
|
Re: Between Rounds
Be sure you test your new code on your robot before you decide to go with it in competition. I've seen robots do things that no one expected. Sometimes the surprises weren't good.
|
|
#5
|
||||
|
||||
|
Re: Between Rounds
Quote:
I've had autonomous modes that spun in circles, went backwards into the drivers wall, or ran full speed into the far drivers wall. The refs really didn't like that last one... |
|
#6
|
|||
|
|||
|
Re: Between Rounds
Quote:
p.s. We usually don't get completedly programmed until the competition. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Practice Rounds = First Four Rounds...any qualms? | Jessica Boucher | Regional Competitions | 9 | 21-03-2004 20:24 |
| Elim Rounds | Andy144 | Rules/Strategy | 2 | 05-01-2003 11:42 |
| Elimination Rounds | Jeff Rodriguez | Rules/Strategy | 15 | 05-01-2003 11:33 |
| Elimination Rounds vs. Qualifying Rounds | archiver | 2000 | 1 | 23-06-2002 22:43 |
| Practice Rounds?? | archiver | 1999 | 6 | 23-06-2002 22:31 |