Servos not moving

Marlfox · #1 09-02-2009, 18:16

Our servos are not responding at all, but they do give values in Labview and the motors will run, but our servos do nothing. We have replaced the servos and are using example code. Please help us!!!!

AdamHeard · #2 09-02-2009, 18:21

Quote:

Originally Posted by Marlfox

Our servos are not responding at all, but they do give values in Labview and the motors will run, but our servos do nothing. We have replaced the servos and are using example code. Please help us!!!!

I believe there is a jumper that mus be done on the digital sidecar per each pwm channel if you are using servoss. This provides the additional current servo's require.

Marlfox · #3 09-02-2009, 18:24

thanks guy in the computer

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
servos not responding to camera code	windell747	Programming	10	01-02-2009 16:16
Camera moving but not tracking	ijk90825	Programming	3	31-01-2009 14:40
Camera tracking but not moving	penguain	NI LabVIEW	9	30-01-2009 10:10
CMUCam Servos not Responding on Robot	krigby	Programming	7	20-01-2006 23:19
Servos not getting right voltage	sheyna	Programming	2	17-01-2006 21:57