|
|
|
 What if, each alliance has a pile of AndyMark equipment in front of them. They then have 2:00 minutes to assemble said equipment, and build a working robot that will race to the other side and grab the other alliance's flag. - Pjohn1959 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
10-02-2009, 10:41
|
|||||
|
|||||
|
Re: can't get control system to function
Pretty much everything you need to know, including setup instructions, component manuals, software updates, example programs, and pointers to much, much more can be found by going to http://www.usfirst.org/frccontrolsystem.
|
|
#3
10-02-2009, 11:19
|
|||||
|
|||||
|
Re: can't get control system to function
Quote:
Install the latest Wind River update too. There is also recently released firmware for the Driver station that you should install, but get v11 onto the cRIO first. |
|
#4
10-02-2009, 12:26
|
|||
|
|||
|
Re: can't get control system to function
We have fixed the problem. Apparently our crio had some corrupted code in it. We set all of the pin switches on the crio to the opposite of their original settings and rebooted it clearing all of the memory . We then flipped them back and reformatted it. This gave us communication with the driver station.
Thanks for everyone's help! team 539 |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can't get program to execute | Thxe | C/C++ | 3 | 09-02-2009 08:33 |
| Get Angle Function in Labview | popo308 | Programming | 2 | 01-02-2009 15:16 |
| Can't get EDU RC to print things. | devicenull | Programming | 2 | 29-01-2006 16:42 |
| Why can't we get along? | Sean_330 | General Forum | 23 | 19-03-2003 21:38 |
| Can't We All Just Get Along?? :) | archiver | 1999 | 9 | 23-06-2002 22:17 |
Hybrid Mode
